Home About Us Products Contact Us
 
 

     
   
  3M Abrasives for all industries with various sizes & Grit
3M Abrasives for all industries with various sizes & Grit
 
     
   
  3M™ Filters and Cartridges
It is for Electrometric Facepiece Respirators Half and Full Face Respirators to provide gas and vapour protection.
 
     
 
::: [ About Nitti Boots | Products ]‏
::: [ Low Cut | Mid Cut‏ | High Cut ]
 
We provide a range of models such as Low Cut models, Mid Cut models and High Cut models. All the models are available in both metallic and non-metallic toe cap. You can click on the menu located at the side of the page for more information on these models.
 
MID CUT

22281 22281


Nitti Mid Cut Laced-Up provides more safety protection as compared to low cut models, it also makes a trendy safety footwear. With premium quality finishes including the anti-rust brass eyelets and tough-wearing shoelaces, this model proves the ruggedness and durability of Nitti safety footwear.

 
22681 22681


Nitti Mid Cut Zipped is a highly popular model and features a user-friendly side zip for easy wear. It's 7" height of tough construction comes with an extended tongue and comfortable padded collar support system. Flexible full-grain leather brings comfort, fashion and durability.

Add to enquiry cart                                                       Top   
 
Add to enquiry cart                                                       Top   
     
22781 22781


Nitti Mid Cut Pull-On model is a hassle-free safety footwear. It provides extra-wide steel toe caps and raved for its sturdy triple stitching and sleek look.

 

Metatarsal Guard - MetG


Metatarsal guards protect the upper foot and toe area by deflecting and dispersing the impact of falling goods. It is designed to complement safety toe cap footwear as the lip of the guard sits on top of the safety toe cap at load point.

Add to enquiry cart                                                       Top   
 
Add to enquiry cart                                                       Top   

:: Comfort Design ::

NITTI IS ABOUT COMFORT

Health feet is the result of comfortable footwear, and Nitti has spend years perfecting the craft of making safety footwear that is as exceptionally comfortable as it is sturdy. The typical toe cap has a narrow tip, which causes toes to bend with pressure, thus restricting blood circulation in the feet. Nitti's wider toe cap eases pressure on the toes without compromising on safety, promoting healthy feet.

MAKING YOUR SAFETY FOOTWEAR GO EXTRA MILE

Nitti Safety Footwear is designed to be extremely robust and can be worn in most industrial environments. Selection of suitable footwear must be made according to the specific needs of the jobs,  types of hazards encountered and working conditions. For optimum protection and durability, we recommend regular cleaning and inspection of your Nitti footwear, and prompt replacement of excessively worn damaged footwear.

Boot care

Regular cleaning and wax polishing will help enhance the durability of your boot. Rinse boot with water after exposure to cement, as it will cause the leather upper to dry and cracks to form. Do not wash your boots. Wet boots should be air dried naturally at room temperature, with cushion foot bed and laced removed, and boots opened fully. Never force dry or use strong detergents or caustic cleaning agents. Antistatic properties can be changed significantly by flexing or contamination, if worn in wet conditions and with wear overtime.

Storage

Do not store your boots in direct sunlight. Always air-dry your boots after use and store them in a cool, dry and well-ventilated place.

 

 

 

 

HOME | ABOUT US | PRODUCTS | CONTACT US
 

Mass Technologies Pte. Ltd.

7, Bukit Batok Street 22, Singapore. 659584 | Tel: 6763 4600 | Fax: 6763 6316

Copyright © 2017 Mass Technologies Pte Ltd. All Rights Reserved.